SELECTION & APPLICATION GUIDE |
|
"38" DIFFERENT MODELS TO CHOOSE FROM |
EXPERIENCE & SERVICE, IT'S MORE THAN A SLOGAN -
"IT'S OUR EDGE"
Application&Selection-Guide |
Model |
Hopper H/W |
Horse_Power |
Cut. Cir. |
Knives- Rotor/Bed |
Scr'n Hole |
Chamb. Type |
Sound Proof |
Floor Dimension |
LB/HR |
Ship. Wght. |
|
"Short Step" Rotor design with adjustable rotor knives, all units are soundproofed w/optional cutting chamber. Optional: robot feed chute, high level proximity switch. For granulating sprues, runners, blow and injection molded parts. |
9 X 7 8 X 6 8 X 12 11 X 14 11 X 20 |
2 3 5 10 10 |
7" 7" 7" 8" 8" |
3X2=6/2 3X3=9/2 3X6=18/2 3X5=15/2 3X7=21/2 |
1/4" 1/4" 1/4" 5/16" 5/16" |
CONV'T OFFSET OFFSET OFFSET OFFSET |
STD STD STD STD STD |
17-23-48 18-27-47 24-27-47 29-37-59 36-37-59 |
100 175 225 600 800 |
370 500 700 1450 1500 |
|
|
IM Series-Press Side Segmented rotor design with bolt on knives, has constant cutting circle. Optional robot feed chute and low speed rotor. For grinding heavy runner & thick walled parts. |
8 X 14 10 X 16 10 X 21 |
5 10 10-15 |
6.3 8 8 |
3X5=15/2 3X5=15/2 3X7=21/2 |
1/4" 5/16" 5/16" |
CONV'T CONV'T CONV'T |
STD STD STD |
27-31-49 31-36-59 36-36-59 |
500 800 950 |
1000 1500 1900 |
|
|
Open rotor design, high shear slant mounted knives. Rotating end disc, has water cooled chamber is offset design. For sprues, runners, inj. and blow molded parts, film, sheet, profiles. Optional: vacuum bin, blower pkg., film roll feed, five knife open rotor. |
6 X 8 8 X 24 12 X 14 12 X 20 12 X 30 12 X 40 12 X 56 |
3 10 10-20 20-30 20-40 20-40 30-40 |
6 8 10 10 10 10 10 |
2/2 3/2 3-5/2 3-5/2 3-5/2 3-5/2 3-5/2 |
1/4" 1/4" 5/16" 5/16" 3/8" 3/8" 3/8" |
OFFSET OFFSET OFFSET OFFSET OFFSET OFFSET OFFSET |
OPT OPT OPT OPT OPT OPT OPT |
20-32-53 40-40-63 31-50-63 38-50-65 48-56-65 59-56-65 75-56-65 |
150 540 420 660 1200 1500 2000 |
480 890 1800 2300 3540 3750 4000 |
|
|
High capacity, central granulating applications, open rotor high shear slant mounted knives, rotating end disc, powered hopper opening device, solid steel flywheel sheaves. For heavy thick walled parts, film, sheet, pipe, profiles, options, film roll feed, blower package. |
16 X 24 16 X 36 17 X 20 17 X 28 17 X 56 19 X 60 |
40-100 50-75 40-75 50- 100 150-200 50-75 |
16 16 17 17 17 16 |
6-10/4 9-15/6 3-5/2 3-5/2 6-10/4 15/10 |
3/8" 3/8" 3/8" 3/8" 3/8" 3/8" |
OFFSET OFFSET CONV'T CONV'T CONV'T OFFSET |
OPT OPT OPT OPT OPT OPT |
49-83-88 61-72-88 43-60-84 56-72-92 88-72-92 91-80-101 |
1100 1700 1400 2000 3000 5000 |
4850 7000 4850 5000 12270 12270 |
|
For heavy duty central granulating applications. Open and hog rotor design, 1630 lb. flywheel sheaves, powered hopper- s/cradle - deflector door opening device. Solid "Hog" Type Rotor |
22 X 28 22 X 40 22 X 56 22 X 32 22 X 40 22 X 56 |
100-200 100-200 200-400 150 150-200 300-400 |
20 20 20 20 20 20 |
3-5/2 6-10/4 6-10/4 12/4 15/4 21/4 |
3/8" 3/8" 3/8" 3/8" 3/8" 3/8" |
CONV'T CONV'T CONV'T CONV'T CONV'T CONV'T |
OPT OPT OPT OPT OPT OPT |
57-91-121 79-91-121 95-91-121 77-91-121 79-91-121 95-91-121 |
2800 3800 4500 2000 3000 3250 |
9500 12500 16000 15000 16000 18000 |
|
|
For large molded parts such as 55 gal. drums, automotive parts, refrigerator liners. Also for film, sheet pipe, profiles, and post consumer products. |
22 X 48 22X60 27X48 |
100-150 150-200 125-200 |
22 22 27 |
9/6 12/8 9/6 |
3/8" 3/8" 3/8" |
OFFSET OFFSET OFFSET |
OPT OPT OPT |
72-83-129 99-83-129 90-90-142 |
5000 5000 6000 |
16500 16500 17500 |
|
|
MTU-For inline thermoforming for granulating skeleton under press. |
6X 35 6X 55 6X40 7 X 55 |
10-20 20 20-30 20-30 |
7 7 10 10 |
4/2 4/2 12/8 12/8 |
3/8" 3/8" 3/8" 3/8" |
CONV'T CONV'T OFFSET OFFSET |
STD STD STD STD |
48-76-24 48-95-24 52-79-30 52-94-30 |
800 1200 1200 2000 |
2200 2900 4500 5800 |
|
MTF- For granulating skelton formed sheet and parts. |
F40HB F56HB |
6X 40 6X 55 |
20-30 20-30 |
10 10 |
12/8 12/8 |
3/8" 3/8" |
OFFSET OFFSET |
STD STD |
55-61-47 55-76-47 |
1500 2000 |
4500 5800 |
|
MTSG-For granulating off spec roll stock sheet (two rolls at a time). |
SG40HB SG56HB |
3 X 40 3 X 55 |
30-40 30-40 |
10 10 |
12/8 12/8 |
3/8" 3/8" |
OFFSET OFFSET |
STD STD |
66-58-55 66-76-55 |
2000 2500 |
4500 5800 |