|
|
MT Series Model U-55 "Under the Press Granulator" Infeed Opening 5" wide X 55" Long Voltage 3-60-460 V Rotor Motor T.E.F.C Rotor: closed type, with scissor cutting action. rotating end disc (125 lb. flywheel sheave) 4 knives 30" long made of high carbon high chrome d2 tool steel. Cutting Chamber: heavy steel, plate, pocketed and bolted construction. Blower: model BW1456, 5 hp 3-60-460 volt with 6" O.D. tube discharge (machine mounted). Bed knives: 4 - 27.5" long made of HC/HC d2 steel. Screen: 3/8 diameter holes with 44% open area bolt in type. Feed Rolls: one hypalon roll and one steel roll. Roll speed 70 fpm, drive is 1 hp Sumitomo speed reducer powered feed roll assembly opening device 110 volt control. Casters: four heavy duty 6" diameter swivel type. Electrical: three electrical disconnect boxes with osha/ansi required fused lockout disconnect for rotor, blower and powered feed roll motors 10 ft. of S.T.O. electrical cord from each box. Floor Space: 48" wide X 95" long - 24" high Approximate Shipping Weight: 2700 lbs. |
Send mail to ricky@mpggranulator.com or mpgmike@dragonbbs.com with
questions or comments about info. Phone-800-440-9249
Fax-254-582-0402
|